Correct Usage for Hobie Plug-In Carts
Follow the following guidelines for safe usage of your Hobie Plug-In Carts.
Download the correct usage guidelines as a PDF, 500kb
Download PDFKayak Cart Warning
Hobie Kayaks are designed to accept Plug-in carts, but improper cart selection or improper use can damage or deform hulls.
Damage to Scuppers
Cart posts must insert into scuppers completely and reach into the internal seat, floor or cargo area surface. Incomplete insertion can cause damage to scupper tubes. By passing clear through the hull the cart posts are supported by the hull bottom and upper surfaces. Scupper tubes are not heavily loaded. Incomplete insertion causes loads against scupper tubes which may cause scupper tube failure.
Damage to hull bottoms
Kayaks should not be left on carts for long periods as constant pointload pressure against the hull or scuppers can deform hulls.
Polyethylene hull materials distort under constant pressure. Over long periods the material can “creep”. This can cause the hull bottom to permanently deform. Hull bottoms can dent and scuppers can be distorted to the point where they are pushed up into the upper hull surface.
Installation
Slide the bushings onto the cart posts and down closer to the crossbar pad. Newer carts include a spot weld to stop the bushings from sliding too far down. Place the kayak on the ground upside-down or on its side. Slide the cart into the scuppers.
Adjust the bushing position against the bottom of the scuppers at a point that prevents the wheels from contacting the hull and tighten. The cart may contact at the keel and both scuppers on some models. Re-check that the cart posts fit clear through the hull as described above.
** PRO ANGLER SPECIFIC CONCERNS
The pronounced keel and round outer bottoms of a Pro Angler is at additional risk of distortion or damage without the use of cart bushings. Heavier loads could cause clamps to slip, so re-check tyre clearance often.
Remove the kayak from the cart after use. Store the kayak as described in the owners manual.
Do not store a kayak on the cart
Once again, always remove the kayak from the cart after use. Store the kayak as described in the owners manual.
Hobie Plug-In Cart and Dolly Range
Hobie's Plug-In Cart and Dolly range includes 7 different plug-in carts, 4 types of dolly, and 1 C-TUG made by Railblaza specifically for the Hobie Kayak. Choose from two types of tyre types; SOLID or SAND.
Get on the water faster
with Hobie carts and dollys
Fold and Stow Plug-in Cart
Hobie’s new Fold and Stow Cart weighs in at just over 2.3 kg / 5 lbs and is designed to make transporting your kayak easy. It functions well on a variety of solid surfaces, and conveniently breaks down to stow inside Hobie kayaks equipped with a large front cargo hatch (not designed to fit Twist and Seal hatches). Simply wheel your kayak down to the water, break the cart down and stow it away. Eliminate trips back and forth to the vehicle! At the end of the day, the cart reassembles in a matter of seconds and is ready to roll.
Notice about the Fold and Stow Kayak Storage
The Fold and Stow fits inside roto-molded front hatch only; and is not compatible with 8" twist and seal hatches.
Standard Features
- Collapsible frame with removable wheels for easy stowage
- Lightweight frame; complete cart assembly weighs in at just over 5 lbs.
- Load rating of 175 lbs. suits most models' fully rigged weight
- Quick release cart keeper holds the cart into the scuppers of your kayak
- Retaining bungee keeps the cart frame in the collapsed position
- Carrying bag with shoulder strap for easy transport.
- Post collar clamps to help reduce direct hull load on the cart by displacing load at scuppers.
Fold and Stow Plug-in Cart Capacity
- 80 kg / 176 lb
Kayak Compatibility
Choose a Cart
Hobie Plug-in Carts
Our original plug-in carts plug directly into the bottom of your Hobie kayak through the scuppers and are constructed of a sturdy, welded stainless steel frame. Removable wheels for easy storage. A must-have item for transporting your kayak to the water's edge.
Common Features
- Removable 26cm Wheels - Wheels are easily detached for storage
- Stainless Steel Frame - Lightweight, sturdy construction
- Cart Keeper - Keeps the cart attached to the scuppers
- Post Collar Clamps - Helps reduce direct hull load on the cart by displacing load at the scuppers
Trax 2 Plug-in Cart
This cart has 24cm (blow-molded polyurethane) pneumatic tyres. These tyres have a high capacity and are very durable. Welded Stainless Steel frame. The wheels are easily removable for storage (176lb capacity). This is an all-around cart for soft sand and uneven terrain. The tyres are wide and can be deflated for better performance over softer sand and soil.
Trax 2 Plug-in Cart Capacity
- 80 kg / 176 lb
Kayak Compatibility
Choose a CartTrax 2-30 Plug-in Cart
All the same features of the Trax 2 cart with a higher capacity. The Trax 2-30 cart has 30cm tyres, bringing the capacity up to 242lbs. Even with a lighter load, the Trax 2-30 will be the best plug-in cart for sand.
Trax 2-30 Plug-in Cart Capacity
- 109 kg / 242 lb
Kayak Compatibility
Choose a Carti-Series/Eclipse Standard Plug-in Cart
The i-Series/Eclipse Standard Plug-in Cart is a versatile and convenient solution for transporting Hobie inflatable kayaks and Eclipse boards. Designed with ease of use in mind, this cart features quick-release wheels and a lightweight, durable frame, ensuring effortless portability and storage. Its plug-in design allows for fast, secure attachment, making it perfect for hassle-free transport.
i-Series/Eclipse Standard Plug-in Cart Capacity
- 68 kg / 150 lb
Kayak Compatibility
Choose a Carti-Series/Eclipse Trax Plug-in Cart
The i-Series/Eclipse Trax Plug-in Cart offers superior mobility for Hobie kayaks and Eclipse boards, especially on soft sand and challenging terrains. Featuring balloon tyres and a robust, lightweight frame, this cart ensures smooth and effortless transportation. Its plug-in design allows for quick and secure attachment, making it an essential accessory for easy portability.
i-Series/Eclipse Trax Plug-in Cart Capacity
- 80 kg / 176 lb
Kayak Compatibility
Choose a CartHobie Dolly Cart
The Hobie Tuff Tyre and Beach Tyre Dolly are essential accessories for transporting large Hobie craft with ease. Designed for durability and convenience, these dollies feature robust tyres that effortlessly glide over various terrains, ensuring smooth and hassle-free transportation from your vehicle to the water.
Dolly Common Features
- Hull pad protects the hull of your boat, providing padded support.
- Hull & AMA cradle built-in
- Pull handle simplifies the loading process and acts as a kickstand for keeping the cradle upright
- Easy Assembly Quick to put together and disassemble for convenient storage.
- Corrosion-Resistant Ideal for use in marine environments, resistant to saltwater damage.
- Stable Support Provides firm and steady support to prevent tipping during transport.
- Lightweight Design Easy to maneuver and handle by a single person.
- Ergonomic Handles Provides a comfortable grip for easy maneuverability.
- User-Friendly Design Easy to load and unload the craft, reducing physical strain.
Hobie Tuff Tyre Dolly Features
- Heavy-Duty Construction Built with robust materials to handle large Hobie craft.
- High Load Capacity Capable of carrying large and heavy Hobie craft with ease.
- All-Terrain Tyres Designed to navigate rough and uneven surfaces with ease.
Hobie Beach Tyre Dolly Features
- Wide Balloon Tyres Designed for soft sand and beach environments, preventing sinking.
- Non-Marking Wheels Prevents damage to sensitive surfaces like boat decks.
Capacity Tuff vs. Beach
- Tuff Tyre - 300 kg / 660 lb capacity
- Beach Tyre - 160 kg / 352 lb capacity
Kayak Compatibility
Choose a CartC-TUG
The C-TUG cart is specifically designed to rest your kayak or canoe on the rubberised pads when transporting. Built to last, the C-TUG is made of non-corroding engineering polymers, with stainless steel reinforced axles.
C-TUG Features
- Tool-free assembly
- Puncture-free wheels with high grip rubber tread
- Lightweight at 4.3kgs
- 120kgs loading capacity
- Reinforced composite material
- Thermo-bonded elastomeric seat pads
- Stainless steel reinforced axles
- 2.7m of strap with cam-lock buckle
- Adjustable kickstand
C-TUG Cart Capacity
- 118 kg / 260 lb
Kayak Compatibility
Choose a Cart
Hobie Kayak and Eclipse Plug-in and Dolly Cart Matrix
Choose the appropriate cart or dolly for your Hobie model and the surface conditions on which it will be used.
Download the cart matrix table as a PDF, 260kb
Download PDF| Description Part Number |
Plug-In Standard 80045001 |
Plug-In Heavy Duty 80046001 |
Plug-In Trax 2 80044101 |
Plug-In Trax 2-30 80043001 |
Plug-In Fold and Stow 80047001 |
i-Series/Eclipse Standard 80045101 |
i-Series/Eclipse Trax 80045201 |
C-TUG 80047201 |
AI-TI Dolly Tuff 80046100 |
AI-TI Dolly Beach 80046200 |
PA-UNI Dolly Tuff 80046101 |
PA-UNI Dolly Beach 80046202 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ** Capacity KG / LBS |
68 / 150 | 102 / 225 | 80 / 176 | 109 / 242 | 80 / 176 | 68 / 150 | 80 / 176 | 118 / 260 | 300 / 660 | 160 / 352 | 300 / 660 | 160 / 352 |
| Surface Type | SOLID | SOLID | SAND | SAND | SOLID | SOLID | SAND | SOLID | SOLID | SAND | SOLID | SAND |
| Passport 10.5 | ||||||||||||
| Passport 12 | ||||||||||||
| Compass | ||||||||||||
| Compass Duo | ||||||||||||
| Lynx | ||||||||||||
| Revolution 11 | ||||||||||||
| Revolution 13 | ||||||||||||
| Outback | ||||||||||||
| Oasis | ||||||||||||
| Adventure Island | ||||||||||||
| Tandem Island | ||||||||||||
| Pro Angler 12 | ||||||||||||
| Pro Angler 14 | ||||||||||||
| Eclipse | ||||||||||||
| iEclipse | ||||||||||||
| iTrek 9 Ultralite | ||||||||||||
| iTrek 11 | ||||||||||||
| iTrek 14 Duo | ||||||||||||
| Fiesta |
Plug-In carts are not recommended for the Adventure / Tandem Island Series due to its weight.
Upper end of weight limit; do not use cart with personal gear loaded on kayak.
Fold and Stow fits inside roto-molded front hatch only; not compatible with 8" twist and seal hatches.
Due to its size, the Fiesta requires 2 carts.
** CAPACITY NOTES:
Capacity refers to static load only and when used as intended. Capacity overload can occur on different terrain; such as short drops, stairs, ruts, rugged and/or jagged, and uneven surfaces.
PLUG-IN CART WARNING:
Do not overload. Not for towing or for speeds faster than the average walking pace. Not for long hauls or stairs. Check cart fit carefully to be sure tyres do not rub hull on scupper versions that the posts fit clear through to the cockpit. Heavier model kayaks may require sleeves below cart clamps to keep hulls from contacting wheels. Not for prolonged use/storage. Incorrect use can damage or distort hulls.
KAYAK STORAGE WHEN NOT IN USE:
Plug-In carts are not designed for prolonged use/storage. Store in a kayak cradle to prevent damage and distorted hulls. Incorrect storage can damage or distort hulls.